Finding the right power brick for a high-performance laptop is all about the “holy trinity” of specs: Voltage, Amperage, and Connector Size. Since this is a “Renewed” unit, it’s especially important to verify the physical condition and technical overhead.

Here are the granular technical details for the HP 150W Blue Pin Charger:

Core Electrical Specifications

These specs ensure your laptop receives the exact “diet” it needs to run and charge simultaneously without overheating.

• Output Voltage: 19.5V DC

• Output Amperage: 7.7A

• Total Power Output: 150 Watts

• Input Voltage Range: 100V–240V (Auto-sensing for international use)

• Frequency: 50–60Hz

Physical Connector (The “Blue Pin”)

The “Blue Pin” is HP’s signature connector for thin-and-light workstations and gaming rigs.

• Outer Diameter: 4.5mm

• Inner Diameter: 3.0mm

• Design: Features a central “Smart-Pin” that communicates with the laptop’s BIOS to verify the charger is genuine and provide the correct power profile.

Compatibility & Safety Features

Because this is a 150W unit, it is typically designed for the HP Pavilion Gaming, HP OMEN, and HP ZBook series.

• Backward Compatibility: This charger can safely power HP laptops that require less than 150W (like 120W or 90W) as long as the voltage is 19.5V and the pin fits. The laptop will only “pull” the power it needs.

• Safety Protocols: Includes Over-Voltage Protection (OVP), Short-Circuit Protection (SCP), and Over-Temperature Protection (OTP).

• Renewed Status: Usually indicates the unit has been inspected, cleaned, and tested to work like new, though it may arrive in generic packaging.

Important Checklist

Pro-Tip: If your original charger was 200W or 230W, do not downgrade to this 150W unit. It may cause “Power Adapter Warnings” at boot-up, slow charging, or reduced gaming performance (throttling).